High-speed pyrometer CTlaser 4M from Optris
23 August 2021
Where there is a need for speed
With very fast processes, in some cases with very short cycle times, requirements for devices used in temperature measurement are especially onerous. Also in the transport safety area, with fast rail vehicles, where the temperature of the wheelset bearings must be measured as the train passes, infrared thermometers with very short capture times are required.
Optris now offers the high-speed pyrometer CTlaser 4M specifically for these applications. As well as an ultra-rapid capture time of just 90 µs, it provides a good optical resolution of 33:1 and various focus options. An integrated double laser target allows straightforward alignment onto the object over larger measuring distances.
|The new CTLaser 4M|
The CTlaser 4M measures within the spectral range of 2.2 µm to 6.0 µm, making it ideal for temperature measurements in the range of 0 °C to 500 °C on metals, metal oxides, ceramics or for materials with an unknown or changing emissivity. The measurement head can be used at an ambient temperature of up to 70 °C - a cooled housing is available for temperatures up to 175 °C. The remote electronics unit is connected to the sensor head via a cable which can be up to 15 m long. Important parameters can be entered here directly via three keys and an illuminated display.
The integrated interface allows the CTlaser 4M to be connected directly to a PC, where all settings can be fine-tuned in the CompactPlus Connect software. Date capture and recording are also possible using the software. Other serial interfaces or an Ethernet interface are also available as options.
|The IRmobile app is free of charge and ideal for mobile use|
Instead of a PC, the pyrometer can also be connected to an Android mobile device which has the free IRmobile app installed. This allows the necessary settings to be adjusted very conveniently during commissioning or maintenance work directly on site.
To connect the CTlaser 4M to the process, two scalable analog outputs and three programmable I/O pins (inputs/outputs) are available.
PR & Content
Tel: +49 (0)30 500 197-45
Marketing Communications Manager
Tel: +49 (0)30 500 197-21