header-grafik-pi-overview
You are here:
NEU: PI LightWeight with CuBox adapter kit

Products

Product Program

  • Overview
  • Technical details
  • Applications
  • Datasheets & manuals
  • Software

optris PI LightWeight for aerial thermography

The optris PI LightWeight combined with a CuBox, one of the smallest and lightest computers, allows for radiometric recordings of video imagery from the air. The combination of the miniature PC and a light version of the optris PI thermal imager weighs only  325 g. The PI LightWeight is therefore ideally suited for maintenance work and quality inspections of solar and wind power systems and also for thermographic surveys of buildings.

Important specifications

  • Fully radiometric IR inspection with up to 640x480 pixels
  • Weight: 325 g (PI camera + CuBox)
  • Measurement speed: up to 125 Hz

Product configurator

Technical details of the optris flight thermography systems

 

Scope of supply

  • CuBox serial interface adapter kit
    Adapter cable with 5x I/O ports (can be configured as a digital input, digital output or input for a PWM signal), Micro SDHC card (16 GB) with ready tu use Linus image, USB 3.0 stick (128 GB) with ready to use configuration file, power cable for CuBox (with open ends)

Specifications of CuBox

  • Manuafacturer: SolidRun (www.solid-run.com)
  • Operating temperature: 0 ... 40 °C
  • Relative humidity: 5 ... 90 %, non-condensing
  • Dimensions: 50 x 50 x 50 mm
  • Weight: 115 g
  • Power supply: 5 VDC/ 3A
  • Power consumption 7.5 W
  • Processor i.MX6 Quad CPU (1 GHz)
  • Operating system Linux
  • Memory 16 GB Micro-SDHC card
  • RAM 2 GB LPDDR3 @ i4Pro or 4 GB LPDDR3 @ i4x4
  • Ports 2 x USB 2.0; 1x micro USB for adapter cable; 1x RJ45 Ethernet (Gigabit Ethernet); 1x eSata; 1x HDMI; 1x micro SD

 

Specifications optris PI camera head

  • Measuring range: –20 °C ... 900 °C
  • Spectral range: 7.5 – 13 μm
  • Accuracy: ± 2 % or ± 2 °C
  • Thermal sensitivity (NETD): 40/ 80 mK (depending on camera model)
  • Optics: 13°...90° HFOV
  • Resolution: 640x480 px / 382x288 px
  • Dimensions: 46 x 56 x 90 mm
  • Operating temperature: 0...50/ 70 °C (PI 450)

 

NOTE: Optris sells a serial interface adapter kit for the CuBox computer. The CuBox (i4Pro or i4x4) can be purchased through SolidRun (www.solid-run.com)

 

Product configurator

optris PI LightWeight for flight thermography

The optris PI LightWeight has been especially designed for aerial thermographic inspections. Mounted on a UAV, the optris PI Lightweight allows recording of radiometric IR images and videos. The flight thermography system is therefore eminently suitable for error detection and quality inspections of solar farms and wind power systems. The innovative combination of a CuBox light computer and a thermal imaging camera is also ideally suited for thermographic analyses of hard-to-reach places like roofs of buildings (building thermography) and it is already in use in agriculture where fields are being inspected before being mowed (presence detection)

Product configurator

Thermography software optris PIX Connect included

All IR cameras are delivered with the thermography software optris PIX Connect, which has been developed specifically for the extensive documentation and analysis of thermal images. It allows you to analyse temperature data in real time as well as the remote control of your infrared camera. Furthermore, you can setup individual alarm levels for your process and define visual or acustic alarm signals.

Our thermography software is licence free and can easily be adjusted to your requirements. 

Product configurator

Downloads
Newsletter